Shin Yo speedo 60mm with lights K1.4 polished/white/blue

Description

Shin Yo Speedometer 60mm stainless steel with indicator lights K-value 1.4

Mechanical speedometer with four warning lights (main beam, neutral, motor, indicators) for models with speedometer cable.

Details:

• In a sturdy stainless steel housing
• Dial to 220 Km/h
• With trip meter
• Can be bolted on many places with the supplied retaining strut (for example on the handlebar)
• Also suitable for installation in panels (bolted without bracket with two M5 threads)
• With speedometer cable connection M12x1.0

Executions (not available in all combinations):

• With polished or black housing (1^st specified in the article/ in the selection box)
• With white or black dial (2^nd specified in the article/ in the selection box)
• White or blue lights (3^rd specified in the article/ in the selection box)

Dimensions (approx.):
Fitting Ø: 60 mm
Ø Border: 67 mm
Overall depth total: 46 mm
Depth from adjuster: 25 mm 
Total length with shaft connection: 76 mm
Ø mounting hole in retaining strut: 10 mm
Distance of mounting hole to centre: 45 mm
Distance M5 threaded centre/ centre: 45 mm
Cable length: 50 cm
Weight: 275 g

K-values:
What you need for your model can be seen on the original dial or calculated based on the rotations of the speedometer cable.
K1.4 = K value of 1.4 corresponds to 60 km/h = 1400 revolutions
K1.0 = K value of 1.0 corresponds to 60 km/h = 1000 revolutions
The K value indicates the input revolutions per kilometer.
A K value of 1.4 means that at 1400 input turns, the counter of the speedometer indicates one kilometer driven. An indication of the k value can usually be found on the back of the original speedometer.
K value 1.4 will include most motorcycles from Ducati, Harley Davidson, Honda, Kawasaki, Suzuki and Yamaha - but there are exceptions !!!

Connection Note:
If on the old speedometer two separate turn signal indicator lights were present for the right side and left side, the two single wires (right turn signal and left turn signal) must be connected to the yellow cable of the speedometer.
IMPORTANT: A blocking diode must be connected in series on each of these wires so that the current can flow to the speedometer, but no longer back to the other indicator wires!
Otherwise, all 4 turn indicators would come on, regardless whether you indicate left or right.
We recommend for two 5A silicon power diodes (V) 50V.

Permit (in Germany):
The speedometers do not have E-mark approval, or type approval.
For models that have been homologated to old German law by the Federal Motor Transport Authority (approximately until the end of the 90s), these speedometers can be used without any problems!
With newer models that have been homologated in accordance with EU law, the approval lies with the judgment of the examiner (TÜV, Dekra, etc.).

Price each