Rizoma Conus M-handlebar 28,6/22mm Race Retro MA054B black

Description

Rizoma Conus M-handle bar 28.6/22mm Race Retro MA054

Very stable conical aluminum handle bar with a diameter of 28.6 mm at the clamping and 22 mm at the handle.

Details:

• significantly more stable than end-to-end 22 mm handlebars
• due to special form and width, gives you a  sportive sitting position
• made of aluminum ERGAL 7075
• anodized in high quality
• for any type with an original conical bar
• with additionally necessary conversion terminal blocks also for many models with end-to-end 22 mm handlebars

Measurements (approx.):
Width: 76.6 cm
Outer-Ø at the handle: 22 mm
Outer-Ø at the clamping: 28.6 mm
Width of clamping: 132 mm
Width for clamping lever/switch/handle: each 234.5 mm
Inner-Ø for end of handlebar: 13 mm
offset bent down: 15 degree
offset backward: 41 degree
weight: 1,037

Options:

• Stencil/form to place the holes correctly to use the safety pins to prevent switches from twisting (order number 50180808000)
• universal Conus Adapter, Conus Riser and Conus handle clamp and also model-specific solutions by Rizoma are available in a great variability if the original model is of an end-to-end 22 mm handlebar.
• suit the inner diameter handlebar weight (not only by Rizoma) and Pro Guard lever guard in a varyity of form and color are available
• suitable aluminum handles are available in different shapes

Certification (in Germany):
with TÜV-parts report.
To get this parts report a inspector (TÜV, Dekra etc) must confirm the correct installation concerning the correct operation in public road traffic
This testing confirmation needs to be at the vehicle all the time, similar to an ABE.
It needs to be included into the registration papers at your earliest visit at the road registration/deregistration/reregistration
For those models which are not listed within the parts report, the inspector can enter the handle-bars and the Conus adapter/riser individually if necessary.

For our Swiss customer:
Please purchase this item in one of our Swiss stores, if possible.
Due to the Swiss road traffic legislation for this technical article a CH certificate is needed (supplement). This certificate is issued in our stores and is not supplied with the article.
If you, nevertheless order this item online, please make sure that the motorbike the article is needed for, is listed in the certificate. If the article is not listed, in this case the item is excluded from return/exchange.
We are happy to answer any questions you may have by e-mail or by telephone via our hotline in Switzerland.

Prize per item

Conditions and instructions for extension:

• All cables and Bowden cables must be laid in such a way that they are free of buckling and stressless during all steering and deflection movements and that there is sufficient space to chafing marks.
• The brake hoses should not fall below a bending radius of 40 mm.
• The engine speed must not change to either side when the steering wheel is full and the engine is running.
• Make sure that all controls on the handlebars are positioned correctly, even when the handle-bar is full.
• The HBZ and the storage tank must be in a functional working position.
• Check handlebar and hang-on parts for sufficient ease of movement
• It must be easy to move the handlebar from steering stop to steering stop.
• After the installation, run a functional check of brake, coupling, throttle grip, lighting and horn.