attachment spoiler for windshield XCT 360x163mm clear

Description

The X-creen attachment spoiler for guiding wind flow can be easily set and firmly secured in almost any desired position – no tools necessary. Suitable for use with original windshields or MRA windshields of the same, original shape.

Large, tapered spoiler for guiding wind flow, delivered with 2 adjusters that can be mounted as desired:

1. S version: The angle of the X-creen attachment can be set as desired – recommended if the windshield height is satisfactory and you only want to adjust the spoiler angle.

2. D version: 2 pivot points that can be set independently make it possible to set the angle, height (approx. 11 cm) and distance from windshield. It doesn’t get any more flexible than this!

The attachment is 36 cm wide and has a height at centre of 13.5 cm.

The attachment points can be adjusted to fit the existing screen shape, so it can be mounted on almost any windshield.
If the attachment is secured by drilling through the existing windshield, the original windshield should have a minimum width of 26.5 cm.
If the optional clamping attachment with 60190800020 is used, the minimum width is 28 cm.

4 screws are used to secure the X-creen attachment spoiler. 
To do so, drill through the existing windshield.

As an option, the attachments can also be secured onto the existing windshield using a special extension (order no. 60190800020).
No drilling or adhesive required with this mount.

As an option, for many motorbikes and scooters there are also complete windshields with mounting points in the best possible position for the X-creen spoiler.

With ABE type approval for lots of models (see bike database).
No approval for use with other windshields.