LED headlight with DRL RenoT6 Ø165mm below black matt

Description

Highsider LED main headlight with TFL Reno T6 Ø 165 mm

Smaller 5 3/4 inch headlight with LED light technology, parking light ring and integrated daytime running light.

Details:

• LED low beam (top), high beam (bottom), parking light in outer ring and daytime running lamp in central crossbeam
• in solid metal housing with plastic disc
• easy connection of low beam and high beam if original H4 headlight was installed - plug is designed like the socket of this bulb - for other connections see options
• parking and daytime running lights are connected using a 3.5 mm round plug
• side = for mounting on the side via M8 thread
• below = for mounting at the bottom via an M8x1.25 mounting bolt that can be adjusted forwards and backwards and can be pivoted continuously from below
• very low power consumption
• 12 Volt DC

Measurements (approx.):
Casing diameter 165 mm
Casing length 120 mm
Glass diameter: 146.5 mm (5 3/4 inch)
Distance between side mounting points: 160 mm
Depth from center of side mounting: 70 mm
Depth from center of bottom mounting: 55 mm
Cable length: 30 cm
Side weight: 1,050 g
Bottom weight: 1,240 g

Connection colors:
white = + low beam
blue = + high beam
green = - ground for high beam/low beam
brown = + parking light/position light
red = + daytime running lamp on ignition plus
black = - ground for parking light/daytime running lamp

Options:

• with the switch between daytime running lamp and low beam light via light sensor, the daytime running lamp can be used conveniently even on motorcycles without light switches (order number 50220000670).
• with the counterpart of the H4 plug of the headlight, other cables can also be easily connected via round sockets (order number 50220000720)

Certification:
With EC certificate.
The headlight has a Certificate of Conformity and does not require any further documents.
It can, therefore, be installed without any further steps in accordance with the installation regulations.

Price per piece