guidon relocalisation NN de 22 mm guidon noir

Description

SW-Motech handlebar riser

Moves the handlebar position upward by approx. 30 mm and to the back by approx. 22 mm.

Details:

• For a more relaxed sitting position
• CNC-machined from high-strength aluminium alloy
• Powder-coated for better durability
• Simply screwed on underneath the handlebar as an add-on
• Designed for almost all models with a 22mm or 28.6 mm handlebar if the handlebar clamp is straight
• Please refer to the general type approval for details on where the riser was tested
• If the model is listed in the general type approval, it will generally not be necessary to extend the length of the Bowden wires and brake cables; however, a slightly different riser may be necessary.
• Includes the matching stylish gripper clamp band for the handlebar

Dimensions (approx.):
Width:
Length:
Rise:
Back shift:
Screw hole spacing 22 mm handlebar: 29-37 mm
Screw hole spacing 28 mm handlebar: 37-46 mm
Weight:

Permit (in Germany):
With operating permit
The accompanying operating permit booklet must be with you when you ride.
An entry in the bike documents is possible for reasons of convenience, but not required.
For models not listed here, the handlebar riser can be entered at the inspector’s discretion as an individual TÜV [Technical Inspection Association] (old federal states) or DEKRA [German Motor Vehicle Inspection Association] (new federal states) acceptance test.

For our Swiss customers:
Please note that the Swiss highway code requires that a valid Certificate of Approval must subsequently be obtained through one of our Swiss shops.

Price per pair