Rizoma adaptateurs repose-pieds Ø18mm PE736BS de arrière

Description

Rizoma footrest joints for Rizoma exchange rests

Allows Pro, B-Pro and Street footrests to be mounted in the original retainer.

Details:

• Aluminium adapter joint pair milled from full-billet aluminium with top-quality anodisation
• Required for mounting the Rizoma footrest element (60380603000 and following) in the original footrest
• As a substitute for the rider's or passenger’s rests - see the item description, the selection field, the certificate or the bike DB for the respective models 
• Also fit all bikes which use the same original footrests as the models mentioned
• ATTENTION: NOT suitable for touring and rally rests and not for the footrests of other manufacturers!

Permission (in Germany):
With TÜV part certificate (in combination with the Rizoma footrest elements).
The tester (TÜV, Dekra, etc.) must certify the proper installation before use on public roads.
This test certificate must then be carried while driving, similar to the operating permit.
As soon as possible (that is, the next visit to the road traffic department for registration or change of address) this should be transferred into the registration documents.
Models not included here can be registered after testing by the test engineer with special approval.

For our Swiss customers:
Please note that the Swiss highway code requires that a valid Certificate of Approval must subsequently be obtained through one of our Swiss shops.

Price per pair for both sides of the bike (without footrests)